Software
| Last modified | Product name | Type | Version | Download |
| 2008/10/08 WED | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.14 |
ccesp2700100 to2700214.zip
*1
|
|
Modified : 2.70.02.12 2.70.02.14
[Fix] When a template was read from Encoder setting window, frame rate setting was not properly done. [Fix] Could not properly read AVI file that has zero-sized frames. |
||||
| 2007/01/07 FRI | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.12 |
ccesp2700100 to2700212.zip
*1
|
|
Modified : 2.70.02.11 2.70.02.12
[Fix] Could not read the QuickTime file properly in which multiple codecs are used in one stream. |
||||
| 2006/10/26 THU | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.11 |
ccesp2700100 to2700211.zip
*1
|
|
Modified : 2.70.02.10 2.70.02.11
[Fix] Could not read QuickTime 16-bit raw format properly. |
||||
| 2006/05/08 MON | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.10 |
ccesp2700100 to2700210.zip
*1
|
|
Modified : 2.70.02.09 2.70.02.10
[Fix] Cinema Craft Encoder SP might not recognize the correct frame rate of 23.976 fps QuickTime file. |
||||
| 2006/04/18 TUE | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.09 |
ccesp2700100 to2700209.zip
*1
|
|
Modified : 2.70.02.06 2.70.02.09
[Fix] The slider of "Simple setting" in "Picture settings" window did not move properly. (This problem has been caused in 2.70.02.02.) [Add] When an AVI file has UYVY format, Cinema Craft Encoder SP reads it directly without codec. [Add] If an appropriate QuickTime codec is not found, Cinema Craft Encoder SP tries to use a codec for AVI instead. (Only when the codec is "dv50", for now.) |
||||
| 2006/02/03 FRI | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.06 |
ccesp2700100 to2700206.zip
*1
|
|
Modified : 2.70.02.04 2.70.02.06
[Fix] Audio seek was not possible when QuickTime 7 is used. [Fix] If the frame size of a source movie is 720x486 and offset line > 0, the bottom few lines were corrupted. |
||||
| 2005/12/08 THU | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.04 |
ccesp2700100 to2700204.zip
*1
|
|
Modified : 2.70.02.01 2.70.02.04
[Fix] Fixed improper frame rate calculation of QuickTime file. [Fix] Fixed other miscellaneous bugs. |
||||
| 2005/05/12 THU | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.01 |
ccesp2700100 to2700201.zip
*1
|
|
Modified : 2.70.02.00 2.70.02.01
[Fix] Fixed the problem of 2.70.02.00 in which batch encoding was not functioned. [Fix] The previous version of 2.70 did not work on Athlon processor that does not support 3DNow! Professional. |
||||
| 2005/02/10 THU | CINEMA CRAFT ® Encoder SP | Updater | 2.70.02.00 |
ccesp2700100 to2700200.zip
*1
|
|
Modified : 2.70.01.05 2.70.02.00
[Main additions/changes] — Updated encoder engine to 2.70 rev.8. — Updated HASP driver to 4.96. — Updated User's Guide. — Supported QuickTime movie play on Video trimming window. — Enabled to specify a template in plug-in version. [Fix] — Fixed miscellaneous bugs. |
||||
| 2004/12/15 WED | CINEMA CRAFT ® Encoder SP | Updater | 2.70.01.05 |
ccesp2700100 to2700105.zip
*1
|
|
Modified : 2.70.01.04 2.70.01.05
[Fix] Wave output was short when 3:2 pulldowned. [Fix] Fixed miscellaneous bugs. |
||||
| 2004/11/05 FRI | CINEMA CRAFT ® Encoder SP | Updater | 2.70.01.04 |
ccesp2700100 to2700104.zip
*1
|
|
Modified : 2.70.01.03 2.70.01.04
[Fix] Fixed miscellaneous bugs. |
||||
| 2004/10/22 FRI | CINEMA CRAFT ® Encoder SP | Updater | 2.70.01.03 |
ccesp2700100 to2700103.zip
*1
|
|
Modified : 2.70.01.01 2.70.01.03
[Fix] Wave output procedure might not be completed. [Fix] Fixed miscellaneous bugs. |
||||
| 2004/09/30 THU | CINEMA CRAFT ® Encoder SP | Updater | 2.70.01.01 |
ccesp2700100 to2700101.zip
*1
|
|
Modified : 2.70.01.00 2.70.01.01
[Fix] File size calculation was incorrect when in point is other than zero. [Fix] Audio in point was not properly calculated when 3:2 pulldown was selected. |
||||
| 2004/11/05 FRI | CINEMA CRAFT ® Encoder SP | Updater | 2.70.01.00 |
ccesp2660101 to2700100.zip
*2
|
|
Modified : 2.66.01.01 2.70.01.00
[Main addtions/changes] — Updated encoder engine to 2.70. — Changed GUI. — Supported Adobe Premiere Pro/Pro1.5. (plug-in version) — Added automatic resolution conversion function. — Enabled to change frame size. — Enabled to specify file size. — Added 3:2 pulldown (24p -> 60i) function. — Added auto 2-pass pulldown detection function. — Added several parameters for quality setting. — Added de-interlacing function. — Added 4:1:1 -> 4:2:2 interpolation function. — Enabled to output bottom field first stream. — Enabled to save/load chapter list to/from file. — Enabled to save/load template to/from file. — Enabled to use the last modified parameter setting. — Enabled to shut down the system when finished encoding. — Enabled to play a sound file when finished encoding. — Added a log output setting in the "Options" menu. |
||||