Software
| Last modified | Product name | Type | Version | Download |
| 2011/10/11 TUE | CINEMA CRAFT ® Encoder MP | Updater | 1.0.41 |
1.0.41.pkg
*1
|
|
Modified : 1.0.40 1.0.41
[Add] Added an option so that the encoder can receive video signals only in RGB format. |
||||
| 2011/05/11 WED | CINEMA CRAFT ® Encoder MP | Updater | 1.0.40 |
1.0.40.pkg
*1
|
|
Modified : 1.0.39 1.0.40
[Fix] Filter setting was not properly working. This problem has been fixed. |
||||
| 2010/05/17 MON | CINEMA CRAFT ® Encoder MP | Updater | 1.0.39 |
1.0.39.pkg
*1
|
|
Modified : 1.0.38 1.0.39
[Fix] In some cases when multipass VBR was selected with low average bitrate, a stream whose bitrate deviates considerably may have created. This problem has been fixed. |
||||
| 2009/09/11 FRI | CINEMA CRAFT ® Encoder MP | Updater | 1.0.38 |
1.0.38.pkg
*1
|
|
Modified : 1.0.36 1.0.38
[Fix] Under certain conditions, vertical stripe noise was appeared o encoded pictures. This problem has been fixed. |
||||
| 2009/08/07 FRI | CINEMA CRAFT ® Encoder MP | Updater | 1.0.36 |
1.0.36.pkg
*1
|
|
Modified : 1.0.35 1.0.36
[Fix] When VBV overflow occurred, encoding did not finish normally. This problem has been fixed. |
||||
| 2009/07/27 MON | CINEMA CRAFT ® Encoder MP | Updater | 1.0.35 |
1.0.35.pkg
*1
|
|
Modified : 1.0.34 1.0.35
[Fix] When "Others - Others - Video" was selected at template window, filter setting was not saved. This problem has been fixed. |
||||
| 2009/04/21 TUE | CINEMA CRAFT ® Encoder MP | Updater | 1.0.34 |
1.0.34.pkg
*1
|
|
Modified : 1.0.30 1.0.34
[Fix] The problem that the last frame may sometimes be interlaced when 2:3/3:2 pulldown was selected has been fixed. [Fix] When in point was moved and 2:3/3:2 pulldown was selected, chapters were not properly set. This problem has been fixed. [Fix] When 2:3/3:2 pulldown was selected, marker settings for DVD Studio Pro were not properly set. This problem has been fixed. [Change] Added filter setting. |
||||
| 2008/11/05 WED | CINEMA CRAFT ® Encoder MP | Updater | 1.0.30 |
1.0.30.pkg
*1
|
|
Modified : 1.0.29 1.0.30
[Change] Changed so that when source signals are input as RGB data, users can choose whether to apply 1.8/2.2 gamma correction to the signals or not. (By default, gamma correction is applied to RGB data.) |
||||
| 2008/11/04 TUE | CINEMA CRAFT ® Encoder MP | Updater | 1.0.29 |
1.0.29.pkg
*1
|
|
Modified : 1.0.27 1.0.29
[Fix] When picture data were imported as r408 format, integer overflow of luminance signal may have happened. This problem has been fixed in this version. [Change] Changed so that when picture data are imported as RGB format, 1.8/2.2 gamma correction is applied to the data before encoding. |
||||
| 2008/10/22 WED | CINEMA CRAFT ® Encoder MP | Updater | 1.0.27 |
1.0.27.pkg
*1
|
|
Modified : 1.0.26 1.0.27
[Fix] In the previous version, GUI was changed so that users can explicitly specify the progressive frame setting. However, this setting was not properly saved. The problem was fixed in this version. |
||||
| 2008/10/10 FRI | CINEMA CRAFT ® Encoder MP | Updater | 1.0.26 |
1.0.26.pkg
*1
|
|
Modified : 1.0.24 1.0.26
[Fix] In the previous versions, pixel aspect ratio was always set to 1.0 regardless of the specified frame aspect ratio. The new version sets the pixel aspect ratio correctly. [Change] Changed the user interface for setting field order. |
||||
| 2008/08/25 MON | CINEMA CRAFT ® Encoder MP | Updater | 1.0.24 |
1.0.24.pkg
*1
|
|
Modified : 1.0.23 1.0.24
[Fix] Old versions caused abnormal program termination when more than 512 markers are set. [Fix] Old versions treated irrelevant markers, such as cut markers and transition markers, as chapter markers. |
||||
| 2008/08/06 WED | CINEMA CRAFT ® Encoder MP | Updater | 1.0.23 |
1.0.23.pkg
*1
|
|
Modified : 1.0.22 1.0.23
[Fix] The new version supports r408 pixel format, which resolves luminance shifting issues. |
||||
| 2008/07/02 WED | CINEMA CRAFT ® Encoder MP | Updater | 1.0.22 |
1.0.22.pkg
*1
|
|
Modified : 1.0.26 1.0.22
[Add] Added the function of embedding chapter markers set by Final Cut Pro. [Fix] When 24p materials were feed to be pulled down, the encoder output interlaced frames in the middle of encoding. [Change] The timecode of starting frame will be obtained from Compressor. [Change] Setup program will remove old version before installing new version. [Change] When performing 2:3/3:2 pulldown, the first frame will always be top field first. |
||||
, Custom Technology Corporation. All rights reserved.